How to Display a Sports Jersey Needlepoint Project

Quick answer

Frame your finished sports jersey needlepoint canvas in a shadow box or standard frame with a mat, then hang it in a spot that shows off the design without direct sunlight.

Steps to display your sports jersey needlepoint

1. Finish the edges: Trim the excess canvas to about 1.5 inches around the design. Fold the edges to the back and secure with acid-free tape or whipstitch to prevent fraying. Common mistake: cutting too close to the design leaves no margin for mounting. Leave at least an inch.
2. Block the canvas: Dampen the canvas lightly with a spray bottle, then pin it to a blocking board, stretching it square. Let it dry completely before framing. Skipping blocking can cause the canvas to warp inside the frame. Always block even if the canvas looks flat.
3. Choose a frame or shadow box: Select a frame deep enough to hold the canvas without pressing the stitches against the glass. A shadow box with a spacer works well for needlepoint. Checkpoint: measure the canvas after blocking, not before, to ensure the frame fits.
4. Mount the canvas: Center the design on a foam board or acid-free mat board. Use stainless steel pins or archival tape to secure the canvas on the back. Avoid glue that can yellow over time. Common mistake: using regular tape or pins that rust. Use only archival materials to protect your work.
5. Hang and protect: Hang the framed piece away from direct sunlight and high humidity. Use a picture hook rated for the weight of the frame. UV-filtering glass can reduce fading if the piece will be in a bright room.

Product facts

• Wildcats Jersey: The Wildcats Jersey canvas measures 7.5 x 9.5 inches with a painted design of 3.5 x 5.5 inches on 18 mesh. The small design area leaves extra canvas around the edges, which makes it easy to mount in a standard frame or shadow box without cutting the canvas.